• Home
• RVs for Sale
• Connecticut
• Windham
• Killingly
• 2022 OTHER

Home built overland trailer!
Lots of time has been spent building this.
Hate to see it go But I have not used it in a year and would love to see it put to good use!

What it is:
* A conversation piece, you will not see another one!
* Extremely well built for what it is.
* Easily towable by most vehicles with a 2 receiver.
* Tired of hitting your GVWR on them long trips? Spread the weight and put it in the trailer.
* A complete setup. Take it to your favorite camping spot today!

What its not:
* Something you will take down tight/technical trails At 88 wheel to wheel, its wide!
* Professionally built While well built, keep in mind this was made by a mechanic/electrician and a jack of all trades in a garage on spare time. There will be imperfections in the finish.

Speaking of imperfections. Lets mention the few obvious ones.
1. There is a ding on the rear door comedically covered by a band-aid decal. It has been there since day 1 and never been an issue.
2. There is a small surface scratch on the filon near the passenger side taillight.
3. One of the side doors finish started chipping. This is not part of the weatherproofing, the doors were covered with filon to match the trailer. Its the filon that is chipped. I do have some extra and it will be included if you desire to re-skin the door.

Some specs on it :
* 1600lbs as it will be sold
* 260lb tongue weight
* Trailer is 12x88 with 4 being the tongue and a height of 90
* The box is 5x6.5x36.

The build/whats included:
* 5x8 trailer with a Timbren axle-less suspension (4 lift & long spindles).
* Got rid of the flimsy tongue and replaced it with 2x3 .120 steel welded to the suspension crossmember.
* Hitch is a Lock N Roll. Please have a 2 receiver on your truck or you will need to buy the vehicle side.
* There are stabilizer jacks on each corner (manual).
* Tires are General Grabber 32x10.5x15. Will come with a matching spare. Tires only have 1500 miles on them!
* Marine plywood was used for the base with 2x4 construction above and plywood around that. It was then covered with a waterproof membrane and finally the Filon covering.
* The pull out tray for a fridge measures 32x15.5 with a max height of 22.
* There are 12v power ports on the sides, front and inside to connect what you need.
* All outlets are individually fused and switched from the panel.
* Also included are 2 boxes that will plug into these ports with various USB charging ports in them. Typically ran one to the RTT and another to my sons tent.
* There are area lights on each side of the trailer.
* Up front is the solar input, 120v input and a connection for the GMRS radio antenna.
* RTT is an OVS Nomadic 3. It has the annex included (not pictured).
* Also has various hanging storage things Clothing/shoes/toiletries.

See photos for continued description.